Envir ONF — Peoples

Stands of tree species Code Type Name Resinous types * 1 A Gardened Futaie with % large moderate wood * 2 B Gardened Futaie rich in large wood * 3 C Clear Garden Futaie * 4 D Futaie regularised in small woods * 5 E Futaie regularised in large woods * 6 F Regulated Futaie in Large Woods Hardwood Types * 7 DB Small dominant woods * 8 BM Medium dominant woods * 9 GB Large dominant woods * 10 IRR Irregular and PB-GB Mixing Clear Types * 18 G Dominant resinous * 19 RUI Dominant leafy [link to description pdf](https://carto.ain.fr/webapps/externe/doc/ONF_notice_modeles_LiDAR_v2.pdf) 1 — Modeling principles The present models are constructed from the detection of the apex identified on the digital height model from the LiDAR covers. Only heights greater than 13 meters associated with bowls of more than 5 square meters are preserved. Treatment shall be carried out excluding the ‘unwooded’ type of the IFN stand mapping v.2. Each apex is classified as hardwood or soft based on the slopes of its hoop and its reflectance measured in SPOT 6 images. The diameters at 1.30 m and the increments are estimated by the characteristics of the bowl associated with the apex. At the pixel scale of 26.5 m on the side, the earth surfaces predicted for each tree are summed by species and categories of diameters. The results obtained are corrected according to linear models. Models applied to apex and pixels are calibrated using the forest observatory plots. They are validated on a new set of 240 plots of 15 meters radius measured in 2015 and independent of the calibration set. 2 — Validity of modeled parameters Generally, the validity of modeled parameters is not known for rare and atypical stands at the Ain Mountain scale. These stands are, for example, the plantations of larchs, the pine groves, the young leafy young leafy thinned... The validity in stands of black pine forests or sylvestres has not been verified. All data are for a pre-counting diameter of 17.5 cm to 1.30 m (unless otherwise stated). 3 — Precautions for the realisation of calculations based on the data of the rasters For basal area, production, stem density, stand types, zero values shall be used in the absence of data. These cases correspond either to stands less than 13 metres high (a priori composed of trees with a diameter of less than 17.5 centimeters), or to a type of non-wooded IFN stand. For stand types, the zero value is a non-pre-accountable stand, or an unforested area. For height, diameter and Gini values, the NULL value shall be used in the absence of data. The edge pixels incorporate on a part of their surface an unwooded area. In case the extraction area incorporates such pixels, it is important to apply to the extraction surface a negative buffer that will exclude its points.