Pre-defined Atom Network Capacity Space Eggenfelden

The existing medium voltage grid topology is mapped schematically and not to scale on a background map. Shown in green colour are the lines or nodes in the medium voltage grid, to which an input power of up to 750 kW according to the 2-% voltage stroke criterion according to VDE-AR-N 4110 could be included. On lines and knots colored orange, the capacity is limited. The map’s plan/data status can be extracted from the legend. Ongoing or commissioned construction measures are not shown in the map. Connection requests received after the plan/data status of feed-in users are not taken into account. The graphical representation is based on the calculation of the maximum permissible voltage stroke (2 % criterion) according to VDE-AR-N 4110. The possible network linking points are only considered as information for medium-voltage feeders and not as binding feed-in pre-remarks. Further technical connection criteria and parameters will only be checked during the mandatory network impact assessment. This can lead to an assignment from a more distant network link point. In particular, the following parameters are untested: Short-circuit strength, Separation point optimisation, Earth leakage current compensation, Load on the HS/MS mains transformers; Electricity bottlenecks in the medium voltage grid, Compliance with absolute voltage limits, Compliance with the permissible network retroactivity/shaft limits; Compliance with conductor rope ground spacing of medium-voltage overhead lines; Technical connection on site, Application of peak capping methods (e.g. from the FNN method “flat-rate peak capping with uniform reduction factors”), individual rights of use of individual customers for medium-voltage lines, temporarily operated with 20 kV 110 kV overhead line systems, Bottlenecks in upstream grids