Alya Eulerian LES results fire extinction nozzle low mass flow rate (paraview files)

The present data complements the Deliverable 5.2. Toolchain V2 to couple CFD and multiple droplet and continuous droplet models.It includes a paraview file (*pvd) for the continuous droplet model (Eulerian-Eulerian) with an inlet mass flow rate of  0.05 kg/s.  The unstructured mesh employed to simulate the injector system is composed by 81.6 million tetrahedrons that include the internal ow in the nozzle and the discharged atmosphere. Three levels of refinement are considered to characterize the internal ow and the near eld after the expansion, the jet penetration up to 15D (being D=2mm, the diameter of the nozzle) and the surrounding air with mesh resolution of 0.1, 0.3 and 1.5 mm respectively. A conservative level set is used in combination a a second order low dissipation finite element scheme and the LES model Vreman.  Considered variables are:        <PDataArray type="Float64" Name="AVD32_average"/> : average particle size distribution       <PDataArray type="Float64" Name="AVDEN_average"/> : average density       <PDataArray type="Float64" Name="AVL  _average"/> : average liquid fraction       <PDataArray type="Float64" Name="AVL2 _average"/>: average square liquid fraction        <PDataArray type="Float64" Name="AVS  _average"/>: average surface density       <PDataArray type="Float64" Name="AVS0 _average"/>: average surface density 0       <PDataArray type="Float64" Name="CON01_average"/>: not relevant (instantaneous values)       <PDataArray type="Float64" Name="CON02_average"/>: not relevant (instantaneous values)       <PDataArray type="Float64" Name="CON03_average"/>: not relevant (instantaneous values)       <PDataArray type="Float64" Name="CON04_average"/>: not relevant (instantaneous values)       <PDataArray type="Float64" Name="D32  _average"/>: not relevant (instantaneous values)       <PDataArray type="Float64" Name="DENSI_average"/>: not relevant (instantaneous values)       <PDataArray type="Float64" Name="PRESS_average"/>: not relevant (instantaneous values)       <PDataArray type="Float64" Name="SIGM0_average"/>: not relevant (instantaneous values)       <PDataArray type="Float64" Name="SIGMA_average"/>: not relevant (instantaneous values)       <PDataArray type="Float64" Name="TURBU_average"/>: not relevant (instantaneous values)       <PDataArray type="Float64" Name="VELOC_average" NumberOfComponents="3"/>: average velocity       <PDataArray type="Float64" Name="VISCO_average"/>: not relevant (instantaneous values)