Co-UDlabs _TA_20/06_INSA-GROOF: Sub-hourly Hydro-Meteorological Data of Green Roof Test Plots with Different Dimensions (1m x 1m and 3m x 3m) in Lyon, France

Open data API in a single place

Provided by Zenodo

Get early access to Co-UDlabs _TA_20/06_INSA-GROOF: Sub-hourly Hydro-Meteorological Data of Green Roof Test Plots with Different Dimensions (1m x 1m and 3m x 3m) in Lyon, France API!

Let us know and we will figure it out for you.

Dataset information

Country of origin
Updated
2025.04.15 00:00
Created
2025.04.15
Available languages
English
Keywords
hydrology, green roof
Quality scoring

Dataset description

General description This repository includes the datasets of the Co-UDlabs Transnational Access Project INDOOR-GRASP (Intercomparison of the hydrological Response of Green Roofs Across Scales, sites and experimental setups). The novelty of this project lies especially in the idea to conduct a paired green roof experiment, considering open site experimental plots at INSA Lyon (GROOF) and smaller indoor test plots built in the laboratory. Therefore, a 3x3 sq. m and a 1x1 sq. m test plot have been installed at the GROOF facility on the roof a building of the Institut National des Sciences Appliquées (INSA, Lyon). Measurements have been collected between September 2024 and March 2025. The project aims at developing a model which can be utilized to scale between both type of dimensions. In a later step, indoor experiments are also foreseen to focus on differences between open field and indoor test plots for green roofs. Whilst being a fascinating research question itself, it has high practical relevance: with this approach, the results of shorter (indoor) measurement campaigns can be scaled to long-term behavior through the outcome of this paired experimental and hydrological model approach. New green roof products can be tested more readily in order to proof their functionality.   Data description indoor_grasp.csv file (time series) temporal resolution: 1 min. Description of columns: Quantity Unit Temperature °C Relative Humidity % Wind speed m/s Solar radiation W/m^2 Precipitation mm/min Weight (3x3) kg Runoff (3x3) mm/min Weight (1x1) kg Runoff (1x1) mm/min   missing_values.json file This file includes all data gaps in a machine-readable format   Log files for the 1x1 and 3x3 sq. m green roof experiments 3x3 sq. m setup EVENTS OVER THE PERIOD 09/24/2024 14:10-14:30 12:10-12:30UTC: Watering of the JIM roof 09/30/2024 15:00-15:10 13:00-13:10UTC: Watering of the JIM roof 10/17/2024 15:30-16:00 13:30-14:00UTC: Reboot of the PC and time reset on the Campbell central unit 10/31/2024 10:00-11:00 09:00-10:00UTC: Disconnection of the weight measurement system to install the 1m² roof 11/04/2024 10:30-12:00 09:30-11:00UTC: Verification of 10g trays of JIM, pluviometer and 1m² roof no event in December no event in January 02/06/2025: visit 02/13/2025 10:19:00: Time adjustment of control centers 02/25/2025: visit 02/26/2025: visit 03/26/2025: visit   RAW DATA Sept/Oct: Only 2 minutes of data are missing in the raw dataset (10/17/2024 - 14:12 and 14:13UTC), likely due to intervention on the central unit that day. Maximum and minimum wind speeds have been filled by propagating the last recorded value. The mass of JIM, air temperature, humidity, wind speed, wind direction, solar radiation, evaporation, and Qt_tot were filled by linear interpolation. The two watering events explain the observed peaks in outflow from the roof on September 24 and 30. The disconnection of the weight measurement system on 10/31/2024 at 08:59 UTC caused a negative spike in weight tracking. This value was corrected, as the weights recorded in the minutes before and after were identical (at 956kg). Nov: No minutes are missing in November. The tips from November 4th for JIM and the pluviometer were erased. Dec: No minutes are missing in December. Jan: No minutes are missing in January. Feb: No minutes are missing in February. A correction was made on 02/13/2025 at 10:19 on JIM’s weight, probably due to the synchronization of the control center. Since the points before and after were at 1037 kg, the point at 10:19 was also set to 1037 kg. March: No minutes are missing in March.   1x1 sq. m setup EVENTS OVER THE PERIOD 11/04/2024 14:15-15:30 13:15-14:30UTC: Verification of the rain gauge buckets and the 1x1 roof. no event in December no event in January 02/06/2025: visit 02/13/2025 10:19:00: Time adjustment of control centers 02/25/2025: visit 02/26/2025: visit RAW DATA Nov/Dec:  No minutes are missing in November and December. The tips from November 4th for 1x1 and the pluviometer were erased. Jan: No minutes are missing in January. Feb: No minutes are missing in February. March: No minutes are missing in March. A correction on the 1x1 weight was made on 03/26/2025 between 13:33 and 13:39. These weights were fixed at 156.6 kg due to some unusual values, probably caused by the visit.   Acknowledgements The authors acknowledge financial support from the European Union under the Horizon 2020 program within acontract for Integrating Activities for Starting Communities (Ref. 101008626).
European data infrastructure with broad catalog discovery, free evaluation access and production-grade API options.
190K+
indexed dataset pages
32
countries and EU institutions
2019
API-first since
Free API quota
for evaluation and prototypes
SLA
history and push on production APIs
FAQ

Questions before production use

Practical answers on evaluation, licensing, freshness, versioning and support.

api.store is built and operated by Apitalks s.r.o. Company details and a direct contact path are linked in the footer for vendor checks and procurement review.
Yes. Selected APIs include a free API quota, so your team can validate coverage, freshness, response shape and workflow fit before asking for a production plan.
Often yes, but usage rights depend on the source license and dataset. We surface source, license and update metadata where available, and can help review terms before a production integration.
Maintained APIs include update metadata where available. For production integrations, we can add history, monitoring and push updates so changes are easier to detect and act on.
Production APIs can add SLA, stable identifiers, versioning support, history, push updates and direct support around the data your product or AI workflow depends on.

Didn't find the API you need?

Let us know and we will figure it out for you.

European data discovery with free evaluation access and production-grade API options.

Copyright © 2026. Made by Apitalks