Datasets from the research article: Mallor et al. Integrating 3D printing, Simulations and Surrogate Modelling: A Comprehensive Study on Additive Manufacturing focusing on a metal Twin-Cantilever benchmark.

Datasets from the research article: Mallor C, Lani S, Zambrano V, Ghasemi-Tabasi H, Calvo S, Burn A. Integrating 3D printing, Simulations and Surrogate Modelling: A Comprehensive Study on Additive Manufacturing focusing on a metal Twin-Cantilever benchmark. Advances in Industrial and Manufacturing Engineering 2025:100162. https://doi.org/10.1016/j.aime.2025.100162. Experimental and simulated deflection tip results from the DOE for three process parameters and three levels: T4T_EXP_FEM_deflection_tip_results_DOE_3_parameters_3_levels.xlsx Thermal profile evolution of the build plate for different preheating temperatures including preheating and cooling down. The RT case without initial preheating. The temperature is approximately 21ºC, and with no active temperature control. T4T_Temperature_PFREE_EXP.xlsx The cases of 200ºC and 400ºC with active temperature control: T4T_Temperature_P200_EXP.xlsx T4T_Temperature_P400_EXP.xlsx The authors acknowledge the European Commission for funding the Twin4Twin project [GA No. 101079180] through the Horizon Europe Framework Programme, Widening Participation and Spreading Excellence initiative.