Lattice Boltzmann simulation of liquid water transport in gas diffusion layers of proton exchange membrane fuel cells: Impact of gas diffusion layer and microporous layer degradation on effective transport properties

Underlying data to publication Sarkezi-Selsky et al., J. Pow. Sour. 556 (2023) 232415, https://doi.org/10.1016/j.jpowsour.2022.232415 Polymer Electrolyte Membrane Fuel Cells (PEMFCs) represent a promising technology for clean drivetrain solutions, in particular for heavy-duty applications. However, lifetime requirements demand high durability of each cell component.In this work, transport of liquid water through pristine and degraded gas diffusion layers (GDL) was simulated with a 3D Color-Gradient Lattice Boltzmann model. The GDL microstructure was reconstructed from high-resolution X-ray micro-computed tomography (μ-CT) of an impregnated Freudenberg H14. The effect of a microporous layer (MPL) was considered by reconstruction of an impregnated and MPL-coated H14. Aged microstructures were generated artificially, assuming loss of polytetrafluoroethylene (PTFE) within the GDL and increase of MPL macroporosity as main degradation mechanisms. Liquid water transport within aged microstructures was simulated by imposing a liquid phase flow rate until breakthrough was reached. Subsequently, the GDL microstructures were analyzed for their breakthrough characteristics by means of saturation and effective gas transport properties. When the MPL was pristine, no distinct GDL degradation effect was observable, this was attributed to the MPL dominating capillary transport. MPL aging, however, led to increased saturations and thus to a deterioration of the effective gas transport. With a partially degraded MPL, aging of the GDL then appeared to affect the breakthrough characteristics.