On the impact of the antenna radiation patterns in passive radio sensing: dataset

The measurement sessions took place in a hall with size 6.15 m × 14.45 m and floor-ceiling height equal to 3.35 m.  TX and RX nodes are spaced d=4.00 m apart, while the LOS is horizontally placed at h=0.99 m from the floor. The received power P is measured using a real-time spectrum analyzer (SA) with a built-in tracking generator. The SA tracks N=401 frequency points equally spaced with Δf=1.25 MHz. Further settings are detailed in the paper: https://arxiv.org/abs/2405.09352 1) dir_dir_measurements.csv: [401x75]: received power measurements [dBm] using antenna with a directional pattern (described in the paper) and target on each of  the 75 positions. These are ordered following the enumeration of the scenario scheme (see Figure 2 in the paper). 2) dir_dir_measurements.csv: [401x2]: free space received power measurements (before and after the experiment) [dBm] 3) frequency_points.csv [401x1]: observed 401 frequencies from 2.149 GHz to 2.649 GHz (resolution BW 400kHz, 1.2MHz freq. spacing) 4) omni_omni_measurements.csv: [401x75]: received power measurements [dBm] with omnidirectional antenna and target on each of  the 75 positions. These are ordered following the enumeration of the scenario scheme (see Figure 2 in the paper). 5) omni_omni_measurements.csv: [401x2]: free space received power measurements (before and after the experiment) [dBm] 6) average_radio_map_generation_example.m: matlab script example (generate radio maps with omnidirectional and directional antennas)